| Dimensions |
|
| Overall length |
2,922 mm |
| Overall width |
1,243 mm |
| Overall height (sun top) |
mm |
| Wheel base |
1,917 mm |
| Overall height (no sun top) |
1,200 mm |
| Front wheel tread |
990 mm |
| Rear wheel tread |
980 mm |
| Minimum ground clearance |
115 mm |
| |
|
| !??Power supply/Drive train??! |
|
| Engine type |
Yamaha built, low emission single cylinder 60° incline OHV |
| Displacement |
357cc |
| Bore x stroke |
85 mm x 63 mm |
| Horsepower |
8.5 kW @ 3,500 rpm |
| Compression ratio |
8.1 : 1 |
| Lubrication system |
Splash-style positive oil lubrication |
| Oil tank capacity |
1 litres |
| Air cleaner |
Two-stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge |
| Cooling system |
Forced air |
| Carburetor |
Mikuni BV26-18 |
| Ignition system |
Transistor magneto ignition |
| Motor |
Hitachi 48-volt high-efficiency, shunt wound motor with internal solid state tachometer |
| Transaxle |
EnduraDrive V-belt automatic forward/reverse transaxle equipped with high-precision helical gears, 13.65 : 1 drive axle ratio |
| |
|
| Chassis |
|
| Frame |
HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-base coating, and an electrostatically applied polyester/urethane powder topcoat |
| Body |
Custom-formulated thermoplastic olefin, and the front painted with a two-part top coat of high-luster automotive-grade polyurethane |
| Steering |
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends |
| Front suspension |
Tru-Trak II™ fully independent automotive-style strut suspension |
| Rear suspension |
Unit swing arm with coil springs over hydraulic shock absorbers |
| Brakes |
Self-adjusting, mechanical drum brakes on all 4 wheels |
| Seating |
Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp- and moisture-resistant polypropylene bottom, strengthened with plated steel inserts |
| Bumpers |
Front 8 km/h energy-absorbing bumper |
| |
|
| Performance |
|
| Maximum forward speed |
24 km/h |
| Maximum reverse speed |
18.4 km/h |
| Turning radius |
3.3 metre |
| |
|
| General |
|
| Dry weight |
384 kg |
| Cargo box material |
Roto-molded linear Polyethylene |
| Cargo bed capacity |
363 kg |
| Cargo bed size (LxWxH) |
1,209 mm x 1,243 mm x 356 mm |
| Cargo bed load height |
609 mm |
| Fuel tank capacity |
22.0 litres |
| Tyre size |
Front: 18.00 x 8.50-8.00 (4-ply rating), Rear: 18.00 x 8.50-8.00 (6-ply rating) |
| Seating capacity |
2 persons |
